[ArsTechnica] Modeling predicts plume of neurotoxic lead could reach up to 100 miles away.
In a swirl of questions, fears, and outrage, the US Army announced Thursday that it would delay a plan to blow up 68 deteriorating barrels of lead azide, which would launch toxic gas and lead into the air. A federal appeals court further halted plans later on Thursday with an emergency order. The plume, containing neurotoxic lead, could potentially drift 100 miles north of the Army installation housing it in Middletown, Iowa, according to modeling released by the Army earlier this week.
The Army had planned to carry out two controlled detonations, set off simultaneously around noon Friday, to destroy the barrels where they lie, which is in earth-covered concrete containment structures (called earth-covered magazines or ECMs). Prior to the court stay, the Army rescheduled the blast until November 23 to provide more time to communicate about the situation with Iowans, who have reported being unaware of the detonations until earlier this week.
“Public communication is essential to public trust,” Acting Secretary of the Army Adam Telle said in a post on social media at 7:31 pm ET Thursday. “Therefore, the Army will continue to actively engage with state and local officials throughout the region to distribute accurate, up-to-date information.”
Telle claimed that the Army could not delay the detonation any further than Monday due to the state of deterioration of the compound, which is extremely explosive and sensitive. “This will delay the detonation until the latest possible moment prior to a forecasted temperature drop, which would risk further destabilization of the material.”
Lead azide is a compound used in detonators for munitions and is stockpiled by the US military. In March, the US Army identified that the stockpile in the Iowa facility—the Iowa Army Ammunition Plant (IAAAP)—had deteriorated. The lead azide in the 68 barrels, reported to total around 9,700 pounds (4.4 metric tons), is suspended in a mixture of water and ethanol within the ECMs, but has degraded and crystallized over time. Temperature fluctuations can cause lead azide to dissolve into the water/alcohol solution and recrystallize into needles or platelets, the Army said. In crystallized forms, lead azide becomes extremely sensitive to any physical shock, friction, or heat. The Army determined the current state is a “catastrophically hazardous condition.”
don't slam the door!
RISK ASSESSMENT
In an environmental assessment released Wednesday, the Army said that trying to move the lead azide from its current position for any reason was ruled out. Any sloshing or physical shock from loading, transporting, or burying the barrels for safer detonation would create “an unacceptable safety risk and a high probability of accidental, uncontrolled detonation.”
The military considered neutralizing the lead azide using a chemical reagent, but again ruled it out because it said the process would require handling the lead azide over an extended period, with barrels neutralized at a rate of 3 to 10 per day. “The chemical neutralization process requires significantly more ‘hands-on’ time and physical manipulation of the drums by personnel over a prolonged 7- to 22-day period, drastically increasing the probability of accidental, fatal detonation during handling,” the Army wrote in its assessment.
In all, the Army considered a controlled, mitigated “Blow-in-Place” plan the best option, and it specifically planned for a fall detonation. The Army said the fall weather would “take advantage of periods of reduced thermal cycling and to ensure the lowest impact to facility operations and local agriculture (harvesting).”
According to an emergency permit for the detonation from the Environmental Protection Agency, the plan is to place explosive charges and an accelerant on or near each of the ECMs.
The Army intends to try to mitigate the detonation’s impact with a few simple methods. Those include lime-fill and sand-fill barriers around the ECMs, water cannons and misters to control lead dust in the wake of the explosion, and timing the detonation with ideal weather conditions—avoiding high winds that could increase the area exposed to the plume or, conversely, a thermal inversion that could trap the plume in one place.
# StarringRoles($srow->id) ?>
|